Skip to main content

How To: Change Your Ip In Less Then 1 Minute

NETWORK TECH WORLD How To: Change Your Ip In Less Then 1 Minute

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back

Comments

Post a Comment

Popular posts from this blog

What is network

NETWORK TECH WORLD What is network  A network is a group of devices, such as computers, servers, and printers, that are connected together and able to communicate with each other. Networks can be classified based on their size and scope, such as a local area network (LAN), which is a network that is confined to a small area, such as a single building or campus, or a wide area network (WAN), which is a network that spans a large geographical area, such as a city or a country. Networks can also be classified based on their communication protocols, such as the Internet, which is a global network that uses the Internet Protocol (IP) to connect devices around the world.
Post a Comment
Read more

Ten Keyboard Shortcuts Everyone Should Know

NETWORK TECH WORLD  Ten Keyboard Shortcuts Everyone Should Know Using keyboard shortcuts is the easiest way to save you time and effort when you need to access commonly used symbols or processes. Indeed, navigating through shortcuts will keep your internet browsing fast and sharp. You can use shortcuts to inserts symbols instead of spending hours searching the internet for them and subsequently continuously copying and pasting them throughout your work. Some of the most used symbols in business are available in a three key combo. Pressing and holding Ctrl and Alt  and adding a letter to the combination will serve up the symbol. If you add C, you’ll deliver a ©. R, returns ®. T displays ™.  E shows € and the L creates a numbered list 1) 2). Lost Symbols © Ctrl Alt C ® Ctrl Alt R ™ Ctrl Alt T € Ctrl Alt E 3) Ctrl Alt L There’s a great little time saver if you’re working on many documents, across different programs at the same time. Instead of having
Post a Comment
Read more

Boot Winxp Fast

NETWORK TECH WORLD Boot Winxp Fast Follow the following steps 1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\ 2. From the Start menu, select "Run..." & type "gpedit.msc". 3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window. 4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open". 5. Click "OK", "Apply" & "OK" once again to exit. 6. From the Start menu, select "Run..." & type "devmgmt.msc". 7. Double click on "IDE ATA/ATAPI controllers" 8. Right click on "Primary IDE Channel" and select "Properties". 9. Select the "Advanced Settings" tab then on the device or 1 that doesn't h
Post a Comment
Read more