Skip to main content

Hardware Firewall

NETWORK TECH WORLD The best firewall is a hardware firewall that is completely separate from your operating system. It need not be a dedicated router, could be an old pentium box running Linux. Below I have found some sites that have How To's on setting up an outside hardware router using an old computer and using a little linux program that fits on a single floppy disk.

Brief Description:
floppyfw is a router with the advanced firewall-capabilities in Linux that fits on one single floppy disc.

Features:
Access lists, IP-masquerading (Network Address Translation), connection tracked packet filtering and (quite) advanced routing. Package for traffic shaping is also available.
Requires only a 386sx or better with two network interface cards, a 1.44MB floppy drive and 12MByte of RAM ( for less than 12M and no FPU, use the 1.0 series, which will stay maintained. )
Very simple packaging system. Is used for editors, PPP, VPN, traffic shaping and whatever comes up. (now this is looking even more like LRP (may it rest in peace) but floppyfw is not a fork.)
Logging through klogd/syslogd, both local and remote.
Serial support for console over serial port.
DHCP server and DNS cache for internal networks.

floppyfw


h#tp://www.zelow.no/floppyfw/



Sentry Firewall CD-ROM is a Linux-based bootable CDROM suitable for use as an inexpensive and easy to maintain firewall, server, or IDS(Intrusion Detection System) Node. The system is designed to be immediately configurable for a variety of different operating environments via a configuration file located on a floppy disk, a local hard drive, and/or a network via HTTP(S), FTP, SFTP, or SCP.

The Sentry Firewall CD is a complete Linux system that runs off of an initial ramdisk, much like a floppy-based system, and a CD. The default kernel is a current 2.4.x series kernel with various Netfilter patches applied. An OpenWall-patched current 2.2.x kernel is also available on the CD.

Booting from the CDROM is a fairly familiar process. The BIOS execs the bootloader(Syslinux) - which then displays a bootprompt and loads the kernel and ramdisk into memory. Once the kernel is running, the ramdisk is then mounted as root(/). At this point our configuration scripts are run(written in perl) that configure the rest of the system. It is the job of these configure scripts to put the various startup and system files into the proper location using either what is declared in the configuration file(sentry.conf) or the system defaults located in the /etc/default directory.

Most of the critical files used at boot time can be replaced with your own copy when declared in the configuration file. This is essentially how we allow the user to configure the system using his/her own configuration and init files.

All of the binaries, files, scripts, etc, used to create the CD-ROM are also available on the CD-ROM. So, with a little practice, you can easily build and customize your own bootable Sentry Firewall CD. Please see the HOWTO for more details.


Sentry Firewall


ht*p://www.sentryfirewall.com/docs.html#overview

Comments

Post a Comment

Popular posts from this blog

What is network

NETWORK TECH WORLD What is network  A network is a group of devices, such as computers, servers, and printers, that are connected together and able to communicate with each other. Networks can be classified based on their size and scope, such as a local area network (LAN), which is a network that is confined to a small area, such as a single building or campus, or a wide area network (WAN), which is a network that spans a large geographical area, such as a city or a country. Networks can also be classified based on their communication protocols, such as the Internet, which is a global network that uses the Internet Protocol (IP) to connect devices around the world.
Post a Comment
Read more

Network Devices

NETWORK TECH WORLD A network device is a hardware device that helps to connect a computer or other devices to a network. There are several types of network devices, including: Routers: These devices route data packets between different networks. Switches: These devices allow multiple devices on a network to communicate with each other by forwarding data packets to the intended recipient. Hubs: These devices are similar to switches, but they do not filter the data packets based on the destination. Instead, they broadcast the data packets to all devices connected to the hub. Bridges: These devices connect two different networks and allow data packets to be transmitted between them. Modems: These devices allow computers to connect to the internet by converting data into a format that can be transmitted over a phone line or cable connection. Firewalls: These devices protect a network by blocking unauthorized access and monitoring traffic for any malicious activity. These are just a few exa...
Post a Comment
Read more

How to Hack Computer

NETWORK TECH WORLD  How to Hack Someone's Computer As the digital world becomes more and more complex, the need for deliberate, thorough security grows. Yes, we know, you’ve got everything “password protected.” And yes, not every hacker is like the guys in the movies who are able to keyboard their way through complicated layers of encrypted, password-protected security faster than a gamer boots up a new version of Call of Duty. In the real world it’s a lot easier than that. And no, this isn’t actually a tutorial about how to break into someone’s computer or smart phone or tablet. Just an observation of sorts. A caution to our loyal readers, if you like. The Brand Keys 2012 Customer Loyalty Engagement Index reveals that consumers choose laptop computers on the basis of anything but security. Instead, consumers tend to select on the basis of factors like innovative design and brand reputation. This doesn’t mean that security isn’t important, but that it does mean that it’s...
Post a Comment
Read more